Firmware Xcom Model Xdroid 2 Atau Xcom Z3 Android 5.0 Pac 100% Tested

Firmware xcom z3 pac | Kesempatan kali ini aku coba sediakan stock rom xcom z3 spd hasil backupan dari hape normal, dan karenanya tested sesudah kita flah ulang.

Stock rom xcom z3 ini ukurannya tidak mengecewakan juga, hasil extracknya berkisar 2.3GB, tetapi jangan risau, alasannya yaitu file extrack rarnya sangat kecil sekali, tidak hingga 1GB.

Untuk custom rom xcom z3 kita belum punya firmwarenya, jadi kalau kawan-kawan butuh custom romnya, silakan dicoba jelajahi google dulu kemungkinan ada.

flashing xcom z3 spreadtrum atau cara flashing xcom z3 ini dapat kita gunakan tool research download saja, alasannya yaitu chipsetnya yaitu spreadtrum (PAC file).

Xcom z3 bootloop, kena virus, hilang jaringan, lemot, penyimpanan penuh, aplikasi android berhenti dan sejenisnya, kita dapat dengan flash ulang firmwarenya dengan firmware yang kita sediakan dibawah.

Created by Infinity-Box (c) Chinese Miracle II (c) 2017
Device Brand   : XCOM
Device Model   : t13_x163_bopai_S012_XCOM_Z3_64_4
Device CPU     : t13_bopai_64_4
Device IntName : t13_x163_bopai_S012_XCOM_Z3_64_4_dt
Device Version : 5.1
Device Compile : 19/10/2016 2:32:08
Device Project : XCOM-Z3_Android_5.1_V01_20161018
Device ExtInfo : Z3

Card found: S/N : 28122xxx , v0136
Chinese Miracle II  [SPD module] v 1.26

Set mode to : SP [SC773x] eMMC [Android 6.x]

Operation : Check/Read Info [ v1.26 ]

1. Remove battery. Insert battery back
2. Press and hold 'VolumeUp' and 'VolumeDown' keys
3. Insert cable

 ====  Wait for phone...

Phone found! [ 27 ]
Port Opened
Sync...
Initial Boot Failed!
Boot not done, reason : Wrong BootKeys
Hint : Reset power and use ANOTHER BootKey ( VOL up or VOL down )

Reconnect Power/Cable!


Operation : Check/Read Info [ v1.26 ]

1. Remove battery. Insert battery back
2. Press and hold 'VolumeUp' and 'VolumeDown' keys
3. Insert cable

 ====  Wait for phone...

Phone found! [ 28 ]
Port Opened
Sync...
InitBoot Done [ 0x81 ] , Ver : SPRD3
Sync...
Sending FDL
[Info] : If SW freeze here more, than 15 seconds - remove cable
FDL Ready!
Boot Ver : SC7731 Crev eMMC Loader v2.0   
Sending FLASH FDL
FLASH FDL Ready!
Boot Ok!

FLASH : eMMC Flash , Structure : Ok!

Reading extended warta ...

Model Name  : t13_x163_bopai_S012_XCOM_Z3_64_4_dt
Model Brand : XCOM
Model Device: t13_x163_bopai_S012_XCOM_Z3_64_4
AndrVersion : 5.1
BaseBand CPU: T13_BOPAI_64_4
CompileDate : 19/10/2016 2:32:08
Project Ver : XCOM-Z3_Android_5.1_V01_20161018
Model Ext   : Z3

ExtraInfo : HWInfo not exists, normal phone

Elapsed: 00:00:26

Reconnect Power/Cable!


Operation : Read FullFlash [ v1.26 ]

1. Remove battery. Insert battery back
2. Press and hold 'VolumeUp' and 'VolumeDown' keys
3. Insert cable

 ====  Wait for phone...

Phone found! [ 28 ]
Port Opened
Sync...
InitBoot Done [ 0x81 ] , Ver : SPRD3
Sync...
Sending FDL
[Info] : If SW freeze here more, than 15 seconds - remove cable
FDL Ready!
Boot Ver : SC7731 Crev eMMC Loader v2.0   
Sending FLASH FDL
FLASH FDL Ready!
Boot Ok!

FlashMode Set : Ok!
Detected eMMC Flash , Structure detect Ok!

[FW_READER] : Prepare Ok!
- > Wait phone connected ...

Phone found! [ 28 ]
Port Opened
Sync...
InitBoot Done [ 0x81 ] , Ver : SPRD3
Sync...
Sending FDL
[Info] : If SW freeze here more, than 15 seconds - remove cable
FDL Ready!
Boot Ver : SC7731 Crev eMMC Loader v2.0   
Sending FLASH FDL
FLASH FDL Ready!
Boot Ok!

- > Wait phone connected ...

Phone found! [ 28 ]
Port Opened
Sync...
InitBoot Done [ 0x81 ] , Ver : SPRD3
Sync...
Sending FDL
[Info] : If SW freeze here more, than 15 seconds - remove cable
FDL Ready!
Boot Ver : SC7731 Crev eMMC Loader v2.0   
Sending FLASH FDL
FLASH FDL Ready!
Boot Ok!

Model Name  : t13_x163_bopai_S012_XCOM_Z3_64_4_dt
Model Brand : XCOM
Model Device: t13_x163_bopai_S012_XCOM_Z3_64_4
AndrVersion : 5.1
BaseBand CPU: T13_BOPAI_64_4
Project Ver : XCOM-Z3_Android_5.1_V01_20161018
Model Ext   : Z3

[Read Mode] : HSUSB : 0x3000

[FW_READER] : Reading Firmware Now ...

[Read Ok] : u-boot-spl-16k.bin
[Read Ok] : u-boot.bin
[Read Ok] : prodnv.img
[Read Ok] : sc7731C_CP0_modem.bin
[Read Ok] : DSP_DM_Gx.bin
[Read Ok] : nvitem_w.bin
[Read Ok] : sc8830g_modem_CP2_Trunk_W15.49.3_Release.bin
[Read Ok] : nvitem_wcn.bin
[Read Ok] : logo_480x854.bin
[Read Ok] : fblogo_480x854.bin
[Read Ok] : thirdlogo.bin
[Read Ok] : forthlogo.bin
[Read Ok] : fifthlogo.bin
[Read Ok] : boot.img
[Read Ok] : system.img
[Read Ok] : oem.img
[Build Ok] : cache.img
[Read Ok] : recovery.img
[Build Ok] : userdata.img

AndroidInfo created
Firmware Size : 2321 MiB
Saved to : C:\Users\joelzr\Documents\@@CM2\Xcom Droid 2\T13_BOPAI_64_4_t13_x163_bopai_S012_XCOM_Z3_64_4_5.1_XCOM-Z3_Android_5.1_V01_20161018_Z3\
Done!

Elapsed: 00:32:56

Reconnect Power/Cable!


Cara flashing xcom z3 boleh ikuti step by step dibawah ini

1. Buka research download atau SPD_Upgrade_Tool_R4.0.0001
2. Instal driver xcom z3 jikalau belum ada
3. Load packet
4. Masukkan file PAC
5. Klik start downloading
6. Matikan XCOM Model XDroid 2 alias Z3
7. Tekan tombol bootnya, volume atas (+)
8. Colok usb
9. Tunggu proses flashing hingga selesai

Proses flashing xcom z3 sekitar 5-10 menit, jadi jangan dicabut usbnya hingga benar-benar sukses, ditandai dengan goresan pena PASSED

Firmware XCOM Z3 SPD 5.1

Mahar Pulsa 25.000,- ke nomor 0852 61020 345

Silakan konfirmasi password via SMS/WA

Khusus pengguna selain telkomsel,wajib via WA
karena akhir SMS biasanya pending sampe 5 menit

Or via paypal $2 (2 dollar)

WA : +6285261020345

Email : pariscell@gmail.com

T13_BOPAI_64_4_t13_x163_bopai_S012_XCOM_Z3_64_4_5.1_XCOM-Z3_Android_5.1_V01_20161018_Z3

Download Nvram xcom z3 SPD

Driver_Pack_SPD_MTK

Share this post